Wright Serial # 53014 and higher Uživatelský manuál

Commercial Mower Owner’s Manual For Stander Serial Numbers 53014 and Higher Until Superseded WARNING: READ THIS MANUAL BEFORE USING Revised

9 where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. (Drain fuel to a ½ tank when performing m

10 OPERATING INSTRUCTIONS If you are not completely familiar with the Safety Instruction Manual read it now before proceeding with the operation of

11 brake. The higher engine speed will make the controls much more responsive and the mower much quicker; Use caution if it is your first time. No

12 How to Adjust Neutral Neutral refers to the mower movement when the engine is set to full throttle, parking brake is off, and the control levers

13 How to Test/Use the Blade Clutch/Brake Switch Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing v

14 height of cut range after any adjustments are made to these hangers to ensure that the height of cut adjustments work properly. If unable to ma

15 Spring platform Adjustment The factory setting is both springs set at the most forward position. The more rearward the spring position, the stif

16 port. Use fully synthetic oil: Mobil1 15W-50. With the bypass valves open and the engine running, slowly move the control levers back and forth

17 Spindle and Drive Pulley Split hub R&R  Remove 2, ¼” bolts from split hub and install in thre

18 MAINTENANCE ITEMENGINE ITEMSSEE NOTE BELOWFIRST 8 HOURSDAILYEVERY 25 HOURSEVERY 100 HOURSEVERY 200 HOURSEVERY 300 HOURSANNUALLYInspect for cracks

Foreword Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on giving you advanced engineering and quali

19 Date Maintenance/Service PerformedUnit HoursShop/TechnicianMaintenance Record

20 P/N Description13990017 MACH BUSH, 7/8 ID X 1 3/8 OD X 14 GA13990024 WASHER, NEOPRENE14990002 HBUSH SMALL17460007 FLEXIBLE CHUTE DEFLECTOR, RUBBE

21 Wright Manufacturing, Inc. (hereinafter: WMI) warrants to the original owner that the new WMI mower accompanying this document will be free fro

22 Problem Description Possible Cause SolutionStreaking is when strips of uncut grass are left behind. Blades are not sharp Sharpen bladesBlades a

23

NOTES:

NOTES:

4600X Wedgewood Blvd Frederick, MD 21703 www.wrightmfg.com

TABLE OF CONTENTS PRE-DELIVERY SERVICE OF MOWER BY DEALER ...

3 PRE-DELIVERY SERVICE OF MOWER BY DEALER Before proceeding with the Pre-Delivery Service of your mower, please read the safety instructions manual

4  Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable to possible thrown objects from und

5 SAFETY INSTRUCTIONS WRIGHT MOWER USERS & OWNERS: READ THIS MANUAL BEFORE USING PLEASE BE CAREFUL! Introduction This mower is built t

6 WARNING User Clothing DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pant

7 Initial Operating Safety Guidelines  Read and understand the warnings on the instrument panel of the mower.  Keep a firm hold on the station

8 Zero-Radius Turn Operation During zero-radius turns (when one mower wheel rotates backwards while the other rotates forward) drive extra slow